Rezo Wavy Front Brake Disc (Pair) – Yamaha X-Max YPR 125/250 | XP T-Max 500

Rezo High Performance Brake Discs

Rezo stainless steel front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves.

• Type:Wavy (Contour)
• Outer Diameter:262mm
• Inner Diameter:132mm
• Thickness:4mm
• Number of Holes:5
• Hole Diameter:8mm
• Pitch:150mm

Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc.

Product Info

Disc Surface

The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking.

Disc Buttons

High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low-quality discs.

Hub/Carrier

Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements.

Fitting Advice & Warranty information

When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications.

Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time.

New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs.

Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc.

We recommend fitting sintered brake pads for the front to give the best braking experience.

Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue.

A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping.

Warranty – All Rezo brake discs are backed up with a 1 year unlimited mileage, if it fails we will replace it.

Why buy from us?

At MPW we strive to provide the best quality goods and excellent service to our customers. As avid bikers ourselves we understand the desire to maintain and upgrade your bike with products you can trust. We source our products from some of the industry’s most recognisable brands as well as manufacturing our own range of cost-effective replacement parts. Choose us today and we’ll be with you for the long haul!