Rezo Wavy Rear Brake Disc & Pro-Bolt Kit – Honda/Triumph

Rezo High Performance Rear Brake Disc & Pro-Bolt Stainless Steel Bolt Kit

Your Brake Discs are one of, if not the most important part of your motorcycle. A part that often gets overlooked when replacing discs are the mounting bolts. When the disc gets changed or removed the bolts should always be replaced. This kit includes a Rezo High-Performance disc along with the correct bolt kit from Pro-Bolt. 

Pro-Bolt Stainless Steel Disc Rotor Bolts to mount the disc rotor to the wheel. A replica of the OEM design but manufactured in superior quality grade 316 Stainless Steel. Designed to compliment front axle nuts perfectly.

Rezo stainless steel rear brake discs are manufactured using high grade (420) stainless steel. The discs are cut using a CNC controlled laser and finished with dual diamond grinders to ensure true flatness and high braking performance.

Rezo Disc Specifications:

– Type: Fixed wavy
– Outer Diameter: 220mm
– Inner Diameter: 105mm
– Thickness: 5mm
– Wear limit: 4mm
– Mounting holes: 4
– Mounting hole diameter: 10mm
– PCD (pitch circle diameter): 125mm
– Weight: 712 Grams
– Turning Direction: Universal left or right

Product Info
The disc friction surface is made from heat treated 420 stainless steel with excellent corrosion resistance and high heat-cycle durability. The surfaces are diamond ground to produce a true parallel and flat surface. The disc is slotted for improved water, dust and gas dispersion and improved cooling, and is contoured with a wavy pattern for enhanced looks and to reduce rotational inertia and unsprung weight.
All Rezo brake discs are manufactured to OEM specifications and are a direct replacement for your original discs.

Fitting Advice & Warranty information
When installing your new Rezo brake disc make sure the seating surface on the wheel is clean and corrosion-free. Use new disc bolts and tighten them to the OEM factory torque specification. Clean the disc friction surface using brake system cleaner.
Clean the brake caliper and check it functions correctly. A seized piston or slider pin will cause braking problems and could damage the new disc.
New brake pads must be fitted with your new Rezo disc. This is to allow the new braking surfaces to bed in correctly, maximising performance and giving you a much smoother feel. We recommend using sintered brake pads for the best performance. Failure to replace your old pads can result in improper bedding in and impaired braking performance, and in worst cases could cause heat spots and warping.

Bedding in your new discs and pads takes time and braking performance is reduced until it is complete. New discs and pads usually take around 100 miles to bed in. Initial bedding in should ideally be done with gradual braking at various speeds, with increasing pressure and load applied over time. You will notice performance improve steadily.

For more information regarding the Rezo Warranty Click Here

Whats in the box?

• 1 Rezo Rear Disc
• 1 Set of Pro-Bolt Disc bolts