Yamaha N-Max 125 – Rezo Front Brake Disc

REZO HIGH PERFORMANCE BRAKE DISCS

Rezo stainless steel front brake discs are manufactured using high grade (410) stainless steel. The discs are cut using a CNC controlled laser and finished with dual diamond grinders to ensure true flatness and high braking performance.

Note: This listing is for a single Rezo brake disc.

Specifications
– Type: Fixed
– Outer Diameter: 230mm 
– Inner Diameter: 115mm
– Thickness: 4mm
– Wear limit: 3mm
– Mounting holes: 3
– Mounting hole diameter: 10.5mm 
– PCD (pitch circle diameter): 133mm
– Height (carrier/disc offset): 0mm
– Weight: 820g
– Turning Direction: Universal left or right

Product Info
The disc friction surface is made from heat treated 410 stainless steel with excellent corrosion resistance and high heat-cycle durability. The surfaces are diamond ground to produce a true parallel and flat surface. The disc is drilled for improved water, dust and gas dispersion and improved cooling.
All Rezo brake discs are manufactured to OEM specifications and are a direct replacement for your original discs.

Fitting Advice & Warranty information
When installing your new Rezo brake discs make sure the seating surface on the wheel is clean and corrosion-free. Use new disc bolts and tighten them to the OEM factory torque specification. Clean the disc friction surface using brake system cleaner.
Clean each brake caliper and check it functions correctly. A seized piston or slider pin will cause braking problems and could damage the new disc.
New brake pads must be fitted with your new Rezo discs. This is to allow the new braking surfaces to bed in correctly, maximising performance and giving you a much smoother feel. We recommend using sintered brake pads for the best performance. Failure to replace your old pads can result in improper bedding in and impaired braking performance, and in worst cases could cause heat spots and warping.

Bedding in your new discs and pads takes time and braking performance is reduced until it is complete. New discs and pads usually take around 100 miles to bed in. Initial bedding in should ideally be done with gradual braking at various speeds, with increasing pressure and load applied over time. You will notice performance improve steadily.

For more information regarding the Rezo Warranty Click Here

Why buy from us?

At MPW we strive to provide the best quality goods and excellent service to our customers. As avid bikers ourselves, we understand the desire to maintain and upgrade your bike with products you can trust. We source our products from some of the industry’s most recognisable brands as well as manufacturing our own range of cost-effective replacement parts. Choose us today and we’ll be with you for the long haul!